(+592) 656.9438
Automatic Rebar Bending Machine – RB25
GYD $720,000
- Can bend between 6 to 25 mm diameter rebars (1/4 to 1 inch).
- Bending angle of 0 to 180 degrees, and can reset 2 different angles on the same pass.
- Bending Speed of 5 to 10 seconds using two, foot pedals.
- Durable Single Phase 220 Volts, 60 Cycle motor, no load power 1,700 Watts.
- This machine is suitable for a high productivity environment in medium and large
construction projects. It significantly reduces labour cost and can pay for itself within
one week in labour savings. It advances rebar bending lead time for maintain project
schedule, reduce construction cost, and increase profitability.
Binding Wire Reel – 110m
GYD Original price was: $1,080.$750Current price is: $750.
Construction Site Steel Bar Cutting Machine GQ 50
GYD $720,000
Model GQ 50 Construction Site Steel Bar Cutting Machine
- that comes with the 3-blade option
- ideal for onsite operations for large construction projects
- can cut up to 40 mm or 1.5 inches diameter rebars at less than 10 seconds per cut.
- Multiple bars can be cut at the same time.
- It comes with three cutting knives:
- The flat knife for Round Bars, Flat Irons, Hollow Sections, and Solid Squares;
- The Arc Knife for cutting Steel Rods;
- and The Angle Iron Knife for cutting Angle Iron
- It is supported by the Luo 12 tools sharpening kit.
- The Machine has Forged quenched gears, and high-strength helical tooth design for quiet operation.
- It can cut up to 40 mm or up to 1.5 inches diameter rebars.
- This unit is durable, easy to operate, almost no maintenance, high productivity, low operation cost, and suitable for large construction projects.
Gasoline Powered Fully Automatic Sewer Jetting Machine
GYD $3,800,000
- This unit is ideally suited for clearing backed up sewer lines in City Georgetown, hundreds of times faster, and better than the 18th Century Manual system currently employed to send down humans to clear lines.
- It is also ideal for cleaning Industrial Condenser, and Boilers Tubes, Outlet Lines for Properties, Hotels, and Factories.
- Its operational methodology is the use of a power hose with high pressure rotating nozzles to cut through hard, and backed up Sewers. Its mode of travel is water powered by jets that give enough back-trusts for propelling the cleaning nozzle with water hose forward through the line. At the same time the Sewer gets liquify, and the waste can then be handled by the City Sever Pumps or a Septic-Truck.
- It comes with 50 meters or 164 feet of line to enter deep into sewage pipes, and can clear pipes between 100 to 1,000 mm or 4 to 40 inches in diameter.
Hydraulic/Electric Rebar Cutter RC-16
GYD $189,000
Simple Solutions introduces the RC16 Hydraulic/Electric Rebar Cutter machine.
Stop cutting Steel Rods using the inefficient Chop-Saw, and Angle Grinder. These tools have caused severe injuries to many, are very inefficient, and expensive to operate.
It is 220 - 230 Volts, 50/60 Hz, 900 watts, 3-pin plugs.
This machine has received EU certification – certificate No: M. 2018.201.N7865.
It is operated by one worker, is lightweight, reduces stress, rugged, and weighs 13 Kilograms.
It is powered by an electrical motor, and hydraulic shear, using Molybdenum Vanadium Double Sided Cutting Blade.
It can be used to cut steel rods for making mattings and cages, as well as portable enough to work onsite between steel works.
It can cut between 4 to 16 mm corrugated rebar at a speed of 3 to 5 seconds.
The benefits are less fatigue, significant increase in productivity, lower operation cost, no replaceable discs, and easy to operate.
Model LH 500 Concrete Pavement Vibrating Level Ruler
GYD $320,000
Model LH 500 Concrete Pavement Vibrating Level Ruler.
This Machine is a High Productivity Product that levels, vibrates, and Smooths Concrete in one
pass for Small Roads, Pavements, Strips, Bottom-Houses, and Yards. It eliminates the labour-
intensive hand floats, and reduces work time by more than 80%.
- It significantly reduces Labour Cost, increases Productivity, and Manages Concreting Works before the hardening process steps in.
- It is powered by a Honda 4 stroke gasoline engine, and weighs 35 Kg.
- The Length of Ruler/Vibrator is 2.5 meters or 8.2 feet.
Rebar Tying Machine (Steel-Bar tying machine)
GYD Original price was: $69,000.$59,000Current price is: $59,000.
i. Portable – Battery Operated
ii. Rechargeable Battery - 110/220 Volts, 60 Hz for charging system, Tree point Plug.
iii. Supplied with Binding Wires in rolls
iv. Easy to operate
v. 5 times faster than the manual system – Less Labour needed
vi. Binding Wires will always be available from Simple Solutions