(+592) 656.9438
WE DELIVER
We deliver from East Corentyne to Charity and along the Soesdyke-Linden Highway up to Mackenzie. If you are outside of these areas, please contact us.
Model LH 500 Concrete Pavement Vibrating Level Ruler
GYD $320,000
62HP diesel four-cylinder sewer injection machine
GYD $3,280,000
Gasoline Powered Fully Automatic Sewer Jetting Machine
GYD $3,800,000
- This unit is ideally suited for clearing backed up sewer lines in City Georgetown, hundreds of times faster, and better than the 18th Century Manual system currently employed to send down humans to clear lines.
- It is also ideal for cleaning Industrial Condenser, and Boilers Tubes, Outlet Lines for Properties, Hotels, and Factories.
- Its operational methodology is the use of a power hose with high pressure rotating nozzles to cut through hard, and backed up Sewers. Its mode of travel is water powered
by jets that give enough back-trusts for propelling the cleaning nozzle with water hose forward through the line. At the same time the Sewer gets liquify, and the waste can then be handled by the City Sever Pumps or a Septic-Truck. - It comes with 50 meters or 164 feet of line to enter deep into sewage pipes, and can clear pipes between 100 to 1,000 mm or 4 to 40 inches in diameter.
10
People watching this product now!
Delivery
Related products
Construction Site Steel Bar Cutting Machine GQ 50
GYD $720,000
Model GQ 50 Construction Site Steel Bar Cutting Machine
- that comes with the 3-blade option
- ideal for onsite operations for large construction projects
- can cut up to 40 mm or 1.5 inches diameter rebars at less than 10 seconds per cut.
- Multiple bars can be cut at the same time.
- It comes with three cutting knives:
- The flat knife for Round Bars, Flat Irons, Hollow Sections, and Solid Squares;
- The Arc Knife for cutting Steel Rods;
- and The Angle Iron Knife for cutting Angle Iron
- It is supported by the Luo 12 tools sharpening kit.
- The Machine has Forged quenched gears, and high-strength helical tooth design for quiet operation.
- It can cut up to 40 mm or up to 1.5 inches diameter rebars.
- This unit is durable, easy to operate, almost no maintenance, high productivity, low operation cost, and suitable for large construction projects.
Rebar Tying Machine (Steel-Bar tying machine)
GYD Original price was: $69,000.$59,000Current price is: $59,000.
i. Portable – Battery Operated
ii. Rechargeable Battery - 110/220 Volts, 60 Hz for charging system, Tree point Plug.
iii. Supplied with Binding Wires in rolls
iv. Easy to operate
v. 5 times faster than the manual system – Less Labour needed
vi. Binding Wires will always be available from Simple Solutions
Automatic Rebar Bending Machine – RB25
GYD $720,000
- Can bend between 6 to 25 mm diameter rebars (1/4 to 1 inch).
- Bending angle of 0 to 180 degrees, and can reset 2 different angles on the same pass.
- Bending Speed of 5 to 10 seconds using two, foot pedals.
- Durable Single Phase 220 Volts, 60 Cycle motor, no load power 1,700 Watts.
- This machine is suitable for a high productivity environment in medium and large
construction projects. It significantly reduces labour cost and can pay for itself within
one week in labour savings. It advances rebar bending lead time for maintain project
schedule, reduce construction cost, and increase profitability.